MASTERKURE 101 | Floor varnish
Fresh concrete care
Acrylic lacquer, membrane former for concrete and topping floors, screeds, water-based
Topped industrial floors
Installation of industrial floors
Industrial floors for a warehouse
MasterKure 101 | Membrane former based on acrylic emulsion, designed to protect fresh concrete and cement-based coatings from moisture weathering.
Due to the formation of a coat on the surface, moisture is retained in the concrete layer, which has a beneficial effect on the curing of concrete / coating, reduces the risk of shrinkage cracks.
Scope of varnish Masterkur 101
-
Concrete laying in strong wind or high air temperature;
-
Maintenance of freshly laid MasterEmaco repair mortars, especially in hard-to-reach places;
-
high-rise buildings;
-
Airports and street concretes;
-
Road concrete roads;
- Maintenance of MasterTop cement-based surface hardener.
Features and Benefits
-
Holds the moisture necessary for cement hydration in the body of concrete, forming a film on the surface;
-
Much more effective than classical methods such as covering with wet burlap, film, moisturizing;
-
Gives a more durable, waterproof, dense and smooth surface;
-
Reduces the risk of shrinkage cracks from drying out;
-
Both cement and polymer coatings can be applied on top;
-
The ideal solution for applications in hard-to-reach places;
-
Easy to use, greatly reduces labor costs;
- Does not contain solvents.
|
Material composition |
Acrylic water based emulsion
|
|
Color |
White liquid, milky
|
|
Density |
0.95-1.0 kg/l
|
|
Appearance |
Light opaque layer, matte
|
|
Drying Time ASTM C 309 |
2 hours 15 minutes
|
The procedure for applying varnish membrane former Masterkur 101
-
Applied by uniform spraying on the surface or applied by roller to freshly laid concrete/cement coating;
-
Apply to the final smoothed concrete surface, or to the surface immediately after formwork has been removed.
Consumption
-
The recommended consumption is 0.2-0.25 kg/m2 per concrete surface, 0.15-0.20 kg/m2 per hardener surface;
-
For very hot or windy weather, the consumption can be 0.30 kg/m2;
-
In the shade and indoors, consumption may decrease.
Precautionary measures
-
When applying by spray, make sure that the substrate is evenly covered;
- When applying by roller, apply evenly in a thin layer, avoiding the formation of puddles.
Cleaning tools
-
After use, used tools and equipment should be washed with warm water;
-
If the atomizer is planned to be reused, soak it after use in water for a while;
-
After curing, it can only be cleaned mechanically from the surface.
Package
-
Canister 30 kg;
-
Barrel 220 kg;
- Cube container: 1000 kg.
Storage
-
The material must be stored in its original packaging at +5°C to +35°C;
-
In case of long-term storage, if stratification is observed, mix thoroughly before use;
-
Short-term storage allows arrangement of up to 3 pallets one by one;
-
Long-term storage of pallets - only in one row.
Best before date
Under appropriate storage conditions: 12 months from date of manufacture.
Security measures
-
Do not approach storage facilities during a fire;
-
Store products in well-ventilated areas;
-
During work, you should use work clothes, protective gloves, goggles and a mask, in accordance with the rules of health and safety;
-
Since uncured materials have an irritating effect, contact of the components with the skin and eyes should not be allowed, and in case of contact, rinse with plenty of water;
-
If swallowed, seek medical attention immediately;
-
It is forbidden to bring food and drink to the construction site where the product is used;
-
The product must be kept out of the reach of children.
