BOTAMENT D 11 | Primer for concrete
Acrylic primer, primer for concrete floors and screeds
Primer for concrete for outdoor use
Strengthening primer for concrete
Polymer primer for concrete
Properties
-
Strengthening primer for concrete Botament D 11, can be diluted with water in a ratio of 1:1;
-
Polymer primer for concrete Botament, dries quickly;
-
Acrylic primer for concrete Botament, improves adhesion;
-
Penetrating primer for concrete, can be applied with a roller or paint brush;
-
Botament D 11 | Reduces water absorption;
-
Primer for deep penetration concrete | Binds dust;
- Does not contain solvents.
Application area
-
For priming on concrete, lightweight and cellular concrete;
-
Masonry;
-
Cement and anhydride screed;
-
Cement, lime and gypsum plaster;
-
cement board;
- Drywall.
|
Material composition |
polymer dispersion
|
|
Color |
Red
|
|
Package |
5 l
|
|
Storage |
In a dry, cool place, at least 9 months, unopened
|
|
Density |
1 kg/l
|
|
Consumption |
0.6-0.1 l/m/sq.
|
|
Drying time between coats |
30 minutes
|
|
Drying time before laying tiles |
1 hour
|
|
Rain resistance |
After 1 hour
|
|
Base temperature |
From + 5 °С to + 30 °С
|
|
Cleaner |
Water
|
Foundation preparation
-
The base must meet the following requirements:
-
Dry, clean and unfrozen;
-
The ability to bear the load;
-
Cleaned from grease, oil, paint, cement laitance, delamination and construction debris;
- Loose, soft and low-adhesion base elements must be removed;
- Before re-laying ceramic tiles , make sure that the surface of the gypsum plaster is firm and not smooth.
- sand anhydrite screeds to a stable base;
-
the relative humidity of gypsum plasters must be ≤ 1%;
- the relative humidity of anhydride screeds must be ≤ 0.5%;
Application
-
Apply primer BOTAMENT D 11 with a paint brush, sheepskin roller or by spraying;
-
After drying, the base surface is difficult to scratch;
-
Apply only the required amount of primer, avoiding overpriming, which can lead to the formation of a smooth glossy membraine;
- Acrylic primer, penetrates the base better when applied with a paint brush.
Recommendations
For optimal results, we recommend a trial application of the material before use.
