Master Top 135 PG | Wear-resistant coating for industrial floors

MasterTop 135PG, a dry mix of poured type, for hardening the surface of old and new industrial concrete floors;

Wear-resistant coating, has high strength, can be used both indoors and outdoors;

Can be used for leveling the base, with a layer thickness of 5 to 15mm;

Made on the basis of sulfate-resistant cements, reinforced with PAN fiber;

Has a low content of chromates < 2 ppm from the mass of cement;

The coating is designed to protect the surface of concrete floors subject to medium and high industrial loads;

Significantly reduces the formation of dust and increases the strength, wear resistance, durability of the concrete floor surface;

Leveling the concrete base and laying the finishing layer of the coating in one step;

Suitable for load type XC4, XF4, XD3, XA3 according to EN206-1;

Arrangement of a durable industrial floor inside and outside the premises;

Industrial floors for  Parking;

Industrial floors for loading production complexes;

Industrial floors for shipyards;

Industrial floors for aircraft hangars;

Has excellent workability for at least 30 minutes at temperatures from 15°C to 25°C;

Can be used on both freshly laid and old concrete with a primer;

Ready-to-use dry mix, which, when mixed, forms a plastic mobile workable mortar;

Mobile consistence, it is easily pumped over by the screw pump;

Without bundle;

Resistant to alkalis;

No air bubbles remain when laying;

Increases the abrasive resistance of clean concrete by 2-4 times;

Resistant to freeze-thaw cycles;