Fast concrete floor repairs

Fast concrete floor repairs

Industrial concrete floor repair

Quick repair of a concrete floor in a warehouse

Self-levelling mortar for concrete floors

"The concrete floor needs to be repaired"

betsio

An urgent question for the owner of a warehouse or production facility. 

  • Stopping a business is an unforgivable luxury for an entrepreneur. 

  • Therefore, the exploitation of the usable area is carried out at 100%, 24/7. 

  • In such harsh conditions, the concrete floor in your warehouse is subjected to a variety of extreme loads. 

Abrasion resistance or abrasion resistance of the top layer of concrete is one of the important characteristics for concrete floors. 

 Быстрый ремонт бетонных полов

Repair of concrete floors on the street

  • The movement of heavy equipment on a concrete floor gradually leads to wear of the base.

  • The floor becomes rough, uneven, with shells and cracks.

  • The level of dust in the room rises, the running gear of the equipment wears out.

 Быстрый ремонт бетонных полов

Repair of sinks in concrete floors

Consider the technology of our partners, MC Bauchemie.

How to quickly restore a concrete floor?

Warehouse concrete floor repair

Project Data

  • Bottrop, Germany. April 6, 2017.

  • MC-Bauchemie, has developed a new system for heavily loaded industrial floors MC-Floor Screed

  • With this technology, concrete floor repair, production facilities, storage and transportation areas, driveways can be repaired in one day, and in two days they can be used again.

cryptocasino

Weekend concrete floor repairs

  • Due to its rapid strength development and high abrasion resistance, MC-Floor Screed is very well suited for quick repairs to industrial floors and is also ideal for use on weekend construction sites.

  • With MC-Floor Screed,  businesses save both time and money.

Restoration of concrete pavement in two days

The new MC-Floor Screed industrial flooring system consists of MC-Floor Screed BS emulsion, MC-Floor Screed 10 flowable flooring and MC-Floor Screed 25 fast reacting specialty binder.

 Materials for the restoration and repair of concrete floors

  • MC-Floor Screed 10 for repairing damaged heavily loaded industrial screeds and floors.

  • MC-Floor Screed 10 is a new, fast curing, high strength coating for industrial floors from MC, with which it is possible to produce a liquid screed with a layer thickness of 10 to 30 mm.

  • Quickly restore industrial floors for a warehouse

  • A liquid, one-component, cementitious floor coating that is easy to work with and quite resistant even when applied in thin layers. 

Preparation and application of the repair mortar

  • The substrate must be pre-treated, in accordance with existing technical regulations, using MC-Floor Screed BS emulsion.

  • Subsequently, MC-Floor Screed 10 is poured onto the primed surface and finally smoothed out.

  • After 24 hours, you can apply the next layer, and after 48 hours - the base is ready for use. 

  • Industrial floors harden almost without shrinkage and tension, so after 2 hours they can already be walked on, and after 24 hours they can be treated with the coating system of the MC-DUR series. 
 Быстрый ремонт бетонных полов

Warehouse concrete floor repair

MC-Floor Screed 25 for 25 and 70 mm layers

  • Fast reacting, special binder MC-Floor Screed 25, mixed with 0 to 8 mm screed sand.
  • Then it is applied to the primed floor pre-treated with MC-Floor Screed BS (according to technical rules).

  • The voids that remain are filled, and then the surface is finally smoothed out manually. 

  • It cures quickly and without shrinkage, it can be walked on approximately 4 hours after application, and the next coating can be applied after two days. 

  • After three days it reaches a compressive strength of 35 N/mm², and after 28 days it reaches 45 N/mm².

"Repair concrete floors efficiently" 

If you liked this article and found it useful, share it on social networks - this will help your friends learn about it and support our project.

Thank you!