MasterTile P 300 | Primer for concrete
Primer based on acrylic copolymer for concrete
Concentrate
Latex additive for repair compounds
Primer for concrete for outdoor use
Strengthening primer for concrete
Penetrating primer for concrete
MasterTile P 300 | Acrylic one-component primer, based on an acrylic copolymer, for absorbent surfaces.
Complies with EN 1504-2.
Application area
-
Strengthening primer for concrete MasterTile P 300 | For internal and other premises on vertical and horizontal surfaces.
-
Penetrating primer for concrete is used | For moisture protection of absorbent surfaces such as gypsum boards, gypsum plaster, aerated concrete, plaster, lime plaster, fiberboard.
-
To prolong the laying time of cement-based leveling screed and similar screeds, to increase adhesion to the substrate and to minimize the amount of air bubbles.
-
For priming gypsum plasterboard, gypsum plaster, aerated concrete, plaster, lime plaster and brick walls before applying gypsum plaster on them, in order to prevent cracking due to the rapid absorption of water by the surface.
-
For application to absorbent surfaces such as gypsum board, gypsum plaster, aerated concrete, lime plaster and chipboard, before gluing ceramic or marble tiles to them, in order to prevent rapid loss of moisture from the adhesive and subsequent peeling of the tiles.
-
To improve the quality of cement screeds under carpet, in order to prevent dust formation.
-
It is used as a primer, before gluing wallpaper or applying paint and varnish coatings.
Features and Benefits
-
MasterTile P 300 | Blocks the absorption of moisture from the adhesive composition.
-
Prevents cracking due to rapid water loss when cementitious coatings are applied to absorbent surfaces.
-
Easy to apply.
-
MasterTile P 300 | Provides high quality adhesion.
-
Solvent free and odorless.
- Safe for indoor use.
Specifications
|
Material composition |
Modified Acrylic Resin Copolymer Dispersion
|
|
Color |
light blue
|
|
Density |
1.0 kg/liter
|
|
Consistency |
Liquid
|
|
Surface temperature during application |
+5°C +30°C
|
|
Operating temperature |
-20°C +80°C
|
|
Drying time |
2 hours
|
|
Waiting time before applying the second layer |
2 hours |
|
Full setting time |
24 hours
|
Surface preparation
-
The surface must be sound, clean, and dry.
-
The surface must be free from oil residues, cement laitance, crushed base particles, dust and other particles that may reduce adhesion.
Mixing
MasterTile P 300 is mixed by dilution with a certain amount of water indicated in the material data sheet.
Mode of application
-
Spread the material evenly, prevent the formation of lumps.
-
Used as a paint and primer under wallpaper, on absorbent surfaces such as gypsum board, gypsum plaster, aerated concrete, lime plaster, and chipboard.
-
MasterTile P 300 is applied by brush or roller, diluted 1/2 with water.
-
After drying, other materials can be applied (Consumption: 80 - 125 g/m2 diluted with water).
-
It is used to increase the time of laying and leveling cement mortar or similar screeds, adhesive layer on old substrates, and prevents the formation of air bubbles;
-
MasterTile P 300 is applied by brush or roller, diluted 1/1 with water.
-
After drying, other materials can be applied. (Consumption: 100-150 g/m2 diluted with water).
-
Before bonding ceramic tiles to highly absorbent gypsum plasterboard, gypsum plaster, aerated concrete, lime plaster and chipboard surfaces, apply by brush or roller 2 coats of MasterTile P 300, first coat diluted 1/1 with water, second coat concentrated.
-
MasterTile P 300 is applied by brush or roller, diluted 1/1 with water.
-
After drying, ceramic tiles can be glued. (Consumption: 125-175 g/m2 diluted with water).
-
Prior to applying gypsum plaster to highly absorbent gypsum board, gypsum plaster, aerated concrete, lime plaster and chipboard surfaces, apply by brush or roller 2 coats of MasterTile P 300 1st coat thinned 1/2 with water, 2nd coat thinned with water in the ratio 1/1.
-
MasterTile P 300 is applied by brush or roller, diluted 1/2 with water and a second layer thinned 1/1 with water.
-
After drying, gypsum plaster can be applied.
-
(Consumption: 100-150 g/m2 diluted with water).
- Before laying carpets to reduce dust formation;
-
MasterTile P 300 is applied by brush or roller, diluted 1/3 with water and a second layer thinned 1/1 with water.
-
After drying, gypsum plaster can be applied.
-
(Consumption: 100 g/m2 diluted with water).
-
These values may vary depending on the absorbency of the substrate, ambient temperature and humidity.
-
After 24 hours after applying MasterTile P 300 , you can proceed to the next stage of work.
Consumption
Approximately 80-175 g/m2 depending on the absorbency of the substrate and the quality of the surface.
Precautionary measures
-
MasterTile P 300 is used at temperatures from +5°C to +30°C.
-
It must be protected from dust on the surface of the freshly applied material.
Cleaning tools
After use, tools and equipment should be rinsed with water.
Package
Canisters 10 and 30 kg.
Storage
-
Storage should be carried out in the closed original packaging in a cool and dry place, avoiding freezing.
-
For short-term storage, one-on-one installation of no more than 3 pallets is allowed, shipment must be carried out in the order of receipt.
-
For long-term storage, one-on-one pallets are not allowed.
-
Do not store below +5 °C.
-
Protect from frost.
Best before date
Under appropriate storage conditions - 12 months from the date of manufacture.
Security measures
-
Do not approach storage areas during a fire.
-
Store products in well ventilated areas.
-
During work, work clothes, protective gloves, goggles and a mask should be used in accordance with health and safety regulations.
-
Since uncured materials have an irritating effect, the components should not be allowed to come into contact with the skin and eyes, and in case of contact, rinse with plenty of water.
-
If swallowed, seek medical attention immediately.
-
It is forbidden to bring food and drink to the construction site where the material is applied.
-
The material must be kept out of the reach of children.
