BOTAMENT D 15 | Primer for concrete
Contact primer for concrete floors, screed, tiles, wood, asphalt, stone
Primer for concrete for outdoor use
Strengthening primer for concrete
Adhesion bridge when laying tiles
Properties
- The contact primer is designed for the tile-on-tile method;
-
The adhesive primer dries quickly;
-
Polymer primer increases adhesion (adhesive contact layer);
-
Can be applied with a roller or paint brush;
-
Highly productive;
- Does not contain solvents.
Application area
-
For priming: glazed and unglazed ceramic coatings;
-
Natural and artificial stone;
-
Tightly bound, water-insoluble paints;
-
Thin-layer adhesives for carpets;
-
dense concrete;
-
OSB boards and other wooden coverings;
- Asphalt screeds.
|
Material composition |
polymer dispersion
|
|
Color |
Birch
|
|
Packing |
1 l; 5 l |
|
Storage |
In a cool, dry place, at least 9 months, in unopened original packaging, avoiding freezing
|
|
Density |
1.23 kg/l
|
|
Consumption |
0.12 kg/m/sq
|
|
Drying time before laying tiles |
30-60 minutes
|
|
Drying time before applying leveling coats |
60-90 minutes |
|
Surface temperature before application |
From + 5 °С to + 30 °С
|
|
cleanser |
Water
|
Foundation preparation
The base must meet the following requirements:
-
clean and unfrozen;
-
ability to carry a load;
- free from grease, oil, paint, cement laitance, flakes and debris.
Application
-
Apply BOTAMENT D 15, undiluted, with a roller or paintbrush;
-
After drying, the primer layer is difficult to scratch;
-
When applying, avoid the formation of puddles and streaks;
- Before applying the primer BOTAMENT D 15, it must be mixed, as sediment may remain at the bottom of the package.
Recommendations
- BOTAMENT D 15 is not intended for use on permanently wet substrates;
-
The primed surface must be protected from moisture;
-
For laying ceramic coatings and natural stone on wooden substrates, it is necessary to use fast-hardening adhesives BOTAMENT M 10, M 24 or MULTISTONE;
- For moisture-sensitive wooden substrates, such as parquet, BOTAMENT R 20 or BOTAMENT E 120 primers must be used.
