Latexfalt Joint Fill JE | Sealing cracks in asphalt

Latexfalt Joint Fill JE is designed

• For filling and sealing joints and cracks in concrete and asphalt; 

• Waterproofing install, hot method on horizontal surfaces;

• Installation of temperature and expansion joints, joints and junctions in road surfaces;

• It is used in combination with fine stone filler, metal compensators.

Latexfalt Joint Fill JE/RJ technology

• Heated to a temperature of 180 ° C in a double-walled boiler with oil heating, if possible with stirring;

• Seams and cracks are filled with mechanical fillers or a watering can in cases of local minor work;

• The seal remains intact under a wide ambient temperature range from -30°C to +180°C;

• Consumption of sealant, relative to the volume of the seam, according to the density of the material.

Key Features and Benefits of "Latexfalt Joint Fill JE/RJ"

• High elasticity;

• Excellent adhesion to dissimilar materials: concrete, asphalt, metal, stone filler;

• Temperature resistance up to 180 °C, which allows the use of finished seams at airfields when exposed to jet engine exhaust;

• Frost resistance, allowing exploitation of sealed cracks and seams up to -30 °С;

• UV resistant;

• High performance on shock and dynamic loads;

• Ability to work in winter conditions.