Cosine Slide Joint | Seam profile
Compensation profile for the protection of joints against destruction in industrial concrete floors
Shrink joint repair profile
Profile for control seams
Seam repair
COMPLETE SUPPLY
complete project package
HIGH QUALITY
goods from the world's leading manufacturers
Cosine Slide Joint | Metal profile (steel, galvanized coating, stainless steel), which is an innovative solution in the design of the assembly, the connection of the seam and the concrete slab, providing a uniform redistribution of the load.
Advantages
Cosinus Slide Joint meets two main criteria to consider when designing industrial floors :
-
long service life of the floor and uniform redistribution of the load;
-
regardless of the type of warehouse equipment, the speed of its movement, regardless of the diameter of the wheels and the material from which they are made, Cosinus Slide Joint structures protect the edge of the seam from destruction;
-
ensure the movement of warehouse equipment without vibrations, shock loads, due to the continuous contact of the wheels with two plates at the same time;
-
this guarantees the durability of the industrial floor;
-
reducing the cost of repairing the floor;
-
reducing the cost of operating and repairing warehouse equipment;
-
comfortable operating conditions;
-
labor protection and safety.
Properties
-
Thanks to a special geometric shape, the Cosinus Slide Joint allows you to redistribute the load throughout the floor;
-
The intersection of the waves of the upper and lower profiles creates small concrete consoles that are staggered one above the other;
- Thus, the load is transferred not by the metal structure of the seam, but directly by the floor slab itself.
Specifications
Material |
Steel, galvanized steel, stainless steel
|
View |
cosine
|
Top thickness |
5 mm
|
Length |
2.76 m.p.
|
Height |
115-215 mm
|
Type of loaders |
For all types of wheels
|
seam opening |
up to 25 mm
|
The principle of seamless floors Cosinus Slide Joint, combines the principles of SINUS SLIDE and a special system of load redistribution in the joint.
Seam install
-
To fix the profile in the body of concrete, specially designed non-cut reinforcing bars are used, which are used along the entire length of the seam and connect the upper part to the lower;
-
The profile is set at the boundaries of the grips;
-
The shape of the grip is as close as possible to the square;
-
Recommended installation step: 30*30m;
-
With this installation step, the opening of the seam should not exceed 20 mm.