CEMSTYLE 450 | Self-leveling industrial floors

Colored, finishing, self-leveling cement coating, for floors with medium loads, 6-10 mm

Description

Characteristics

Application

CEMSTYLE 450 | Cement-based self-levelling system.

CEMSTYLE 450 is the ideal floor covering for shops, private homes, offices, showrooms and more.
CEMSTYLE 450 - has excellent adhesion to the base on which it fits.

CEMSTYLE 450 is designed to be used as a concrete top coat in commercial, residential and industrial buildings;
CEMSTYLE 450 can be applied with an automatic, continuous concrete mixer, with a pump (no mortar hopper);
CEMSTYLE 450 is free of casein and other protein additives that produce ammonia during curing;
The recommended thickness for applying CEMSTYLE 450 is 6-30 mm, in one operation;
Under normal conditions, you can walk on it after 1-2 hours, and after 1 week, depending on the conditions of the object, subject it to heavy loads.

Bending strength	8 N/mm² after 28 days
Compressive strength	37 N/mm² after 28 days, ultimate strength ˃ 40 N/mm²
Grip with subfloor	> 2 N/mm²
Content of volatile organic substances	Without ammonia and formic aldehydes
Particle size	Max. 1 mm
Natural shrinkage	< 0.55 ‰ measured at - 50% relative humidity
PH level	About 11.5
Mobility	150-155 mm
Water resistance	Waterproof (expansion under water < natural shrinkage)
Material consumption	1.75 kg / mm / m²
Mixing with water	18% (4.5 liters / 25 kg of product)
Penetrometer Mobility Measurements	150-155mm
Minimum applied temperature	+ 6 ºC
Dry powder density	About 1.6g/cm
Wet Density	˃ 2 g/cm³
Working time	About 15 min, depending on temperature
Packing	25 kg

CEMSTYLE 450 must be applied to a well finished subfloor;
Remove dust, laitance, grease or other materials;
The normal thickness is 6 - 10 mm, but the material can be applied in a layer of 25 - 30 mm, in one operation;
To cover inclined planes, it is recommended to use a small amount of water and pour from the highest point to the lowest;
Incompletely set material can be easily processed or removed, which allows for the necessary alignment;

CEMSTYLE 450 can be applied with an automatic, continuous concrete mixer with a pump (no mortar hopper);
To do this, you need to use clean drinking water in the proportion of 4.5 liters per bag, weighing 25 kg;

Door sills, steps, gutters and storm drains must be insulated with a foam barrier;
Large surfaces should be divided into sections;
The usual width of the plot is 8-12 m, depending on the power of the pump.

All tools and equipment should be cleaned with water immediately.

6 months in dry conditions.