CEMTOP 320 | Leveling compound for floors

Self-leveling compound, leveling compound, floor leveling for parquet, laminate, polymer floors, linoleum, carpet, 6-30 mm

Leveling mass for the home

Tiled floor leveling

Leveler for floor repair

Description

Characteristics

Application

CEMTOP 320 | Cement self-leveling floor screed, which can be applied with a pump, is made from aluminous cement, aggregates, additional binders and chemical additives - polymers.

CEMTOP 320 is a dry powder intended for the preparation of a leveling layer, self-leveling floor.

METHODS AND APPLICATIONS

Self-levelling compound CEMTOP 320 | Designed to be used as a base coat for subsequent application of synthetic, polymeric resin subjected to low to medium loads;
The floor leveling compound CEMTOP 320 can be applied with an automatic continuous concrete mixer, with a pump (without mortar hopper);
When used in small areas, it can be mixed in a bucket or barrel and applied to the floor surface;
The normal thickness of the Cemtop 320 is 6 - 10 mm, but the material can be applied in a layer of 25 - 30 mm, in one operation;
Under normal conditions, you can walk on it after 1-2 hours, and after 1 week, depending on the conditions of the object, subject it to heavy loads.

Bending strength	8 N/mm² after 28 days
Compressive strength	> 32 N/mm² after 28 days
Grip with subfloor	> 2 N/mm²
Content of volatile organic substances	Without ammonia and formic aldehydes
Particle size	Max. 1 mm
Natural shrinkage	< 0.5 ‰
PH level	About 11.5
Mobility	150-155 mm
Water resistance	Waterproof (expansion under water < natural shrinkage)
Material consumption	1.75 kg / mm / m²
Mixing with water 18%	(4.5 liters / 25 kg of product)
Minimum applicable temperature	+ 6 ºC
Dry powder density	About 1.6 g/cm³
Wet Density	> 2 g/cm³
Working time	About 15 min, depending on temperature
Strength set	1-2 hours for pedestrian traffic 24 hours for medium loads 1 week for heavy loads
Storage	6 months in dry conditions, maximum temperature - 20ºС and relative humidity - 50%.

Base

CEMTOP 320 must be applied to a well finished subfloor;
Remove dust, laitance, grease or other materials;
To cover inclined planes, it is recommended to use a small amount of water and pour from the highest point to the lowest;

Incompletely set material can be easily processed or removed, which allows for the necessary leveling.
Concrete contaminated with kerosene or grease can be cleaned by annealing and/or using suitable degreasers;
Use CEMPRIME on subfloor.

MIXTURE PRODUCTION

Floor leveling compound CEMTOP 320 | Can be mixed in automatic continuous concrete mixer with pump (without mortar hopper);
To do this, you need to use clean drinking water in the proportion of 4.5 liters per bag weighing 25 kg;
The mixed material must be used within 15 minutes.

APPLICATION

Door sills, steps, gutters and storm drains must be insulated with a foam barrier;
Large surfaces to be divided into sections;
The usual width of the plot is 8-12 m, depending on the power of the pump.

CLEANING

All tools and equipment should be cleaned with water immediately.

HEALTH & SAFETY

Danger - contains cement, wet cement is corrosive;
Protect eyes and avoid prolonged skin contact;
Keep out of the reach of children.