MasterSeal NP 474 | Polyurethane sealant

MasterSeal NP 474 | Ready-to-use, one-component, elastic, polyurethane, moisture-resistant sealant for seams, width from 5 to 30 mm.

Area of ​​application of polyurethane sealant

 MasterSeal NP 474 is intended for sealing seams

• In buildings, constructions and steel constructions;

• Inside and outside the premises; - in industrial floors, walls and ceilings;

• Sealing is attached to the perimeter of the ceramic tile;

• With constant exposure to water;

• With seam mobility up to 25%;

• Repair of cracks in the concrete floor in the warehouse.

Packaging

• MasterSeal NP 474 is supplied in soft tubes of 600 ml. 

• 20 tubes in a box, 800 tubes on a pallet.

Expiry date 

• The warranty period of the material, in a closed, undamaged original packaging, is 12 months;

• Store the material in a dry, cool place, do not allow freezing.

Consumption

• The consumption of MasterSeal NP 474 depends on the width of the seam and the depth of its filling; 

• With a seam width of 10 mm and a filling depth of 10 mm, the consumption of MasterSeal NP 474 is 100 ml per linear meter of the seam, which allows sealing 6 linear meters with one tube.

Advantages of polyurethane sealant

• One-component, easy to use;

• Excellent adhesion to various substrates;

• High tensile strength;

• The ability to recover after deformation;

• High resistance to weathering and wear;

• Does not lose elasticity for a long time, even at temperatures from - 30 to + 80°C;

• Does not have thermoplasticity;

• High resistance to the effects of fresh, salty, limestone and polluted water, salt solutions and neutral cleaning agents;

• Short-term resistance to mineral oils, oil, kerosene and other lubricants, vegetable and animal fats;

• Resistance to ultraviolet radiation.

Limitation

Do not use MasterSeal NP 474:

• At a temperature below +5 and above +35°C;

• For seams of swimming pools that are constantly under high water pressure.

It is not recommended to use MasterSeal NP 47 4:

• For compensatory glazing seams;

• For movable seams covered with paint;

• For seams exposed to aggressive chemicals (see the chemical resistance table).