Fortecoat 1425 | Acrylic floor lacquer
Impregnation for sealing and sealing concrete
Acrylic lacquer, membrane former, solvent-based, for concrete and topping floors
Installation of industrial floors
Concrete industrial floors
Smooth curing of concrete
Fortecoat 1425 | It is both an impregnating and a surface membrane-forming varnish, used as a final coating on concrete floors, both with and without topping.
Properties Fortecoat 1425
-
By applying varnish, the loss / evaporation of water in the concrete is limited , thereby improving the curing conditions, which provide higher strength characteristics of the concrete slab and its surface layer;
-
At the same time, the pores are closed, thereby significantly reducing the absorbency of the surface;
-
Floor systems treated in this way will ensure dustlessness, increase mechanical and chemical resistance and facilitate maintenance.
Topping floor after applying Fortecoat 1425
Benefits of Fortecoat 1425
-
Possibility of application on the day of laying concrete;
-
Simultaneous care of concrete and creation of a finishing layer;
-
Optimization of the concrete hydration process;
-
Compaction and impregnation of the surface of concrete and topping floors;
-
Improving the strength characteristics of concrete floors;
- Dust removal and increased resistance to abrasion.
Membrane former for concrete floors
Restrictions
-
Do not use in rooms where food products are stored or produced;
-
Not recommended for applications where subsequent layers are to be applied;
-
Coating must be applied immediately after grouting;
- Do not dilute with water or solvents.
Cleaning tools
Working tools (sprayers) are cleaned with xylene or solvent;
Tool
-
It is necessary to immediately clean the field of application of the product;
-
Once hardened, the material can only be removed mechanically.
Package
Fortecoat 1425 is supplied in 20 liter cans.
Fortecoat 1425
Storage conditions
It must be stored in original closed packages in a dry and well ventilated place without direct sunlight at temperatures above 0°C.
Guarantee period
The warranty period is 24 months from the date of manufacture, subject to storage conditions.
Technical specifications
|
The foundation |
Solvent, liquid
|
|
Color |
Transparent
|
|
Density |
0.9-0.95 kg/l
|
|
Consumption |
0.1-0.2 l/m/sq.
|
Application guide
-
Fortecoat 1425 can be applied to fresh concrete immediately after it has been grouted or to existing concrete of any age;
- The substrate must be cleaned before applying the material;
-
It is mandatory to apply Fortecoat 1425 on concrete floors with Fortedur toppings;
-
The coating is applied by roller or spray;
-
The coating must be applied immediately after the final grouting;
-
Fortecoat 1425 is applied in a thin film, one coat is usually sufficient to ensure a dust-free and glossy surface;
-
In a particularly dry or drafty environment, immediately after Fortecoat 1425 has dried, the concrete is additionally covered with textiles or film , protected from wind and drying;
-
In the same way, it is necessary to protect the surface from high temperatures;
-
In case of extremely hot weather, Fortecoat 1425 must be stored in a cool place before use;
-
Due to its excellent impregnating properties, Fortecoat 1425 penetrates and hardens a greater thickness of concrete compared to similar products, which is an undeniable advantage;
-
It is very important that the applied layer is uniform;
-
Uneven application causes the appearance of "spots" on the surface;
-
Excess substance is no longer absorbed into the concrete surface, forms a shiny film, which is gradually eliminated during operation;
-
Fortecoat 1425, provides increased protection against the penetration of water, oils, etc .;
-
Despite this, these substances must be removed from the surface as quickly as possible, in the event of a spill, to prevent staining;
-
Contaminants from cutting seams can cause the surface to turn white if the product is not completely dry.
Lacquer membrane former for concrete floors
Safety and Health
-
Fortecoat 1425 must be stored in a ventilated place, protected from temperatures below 5°C and above 30°C in original sealed containers;
-
Fortecoat 1425 must be protected from open fire and high temperatures and ensure work safety;
-
During operation, avoid contact of the product with skin and eyes;
-
Do not inhale vapors during application;
- For more information, see the Product Safety Data Sheet;
Test certificates
Initial testing of the product and conformity assessment were carried out in accordance with the directives of the Council of the European Communities 89/106/EHS (CPD - Construction Products Directive).
Warning
Fortecoat 1425 must not be applied in unventilated areas or if the substrate and/or ambient temperature drops to the dew point during/after application.
