BOTAMENT M 21 | Tile adhesive
Flexible cement tile adhesive
For concrete bases and cement screed
Class C2 TE
COMPLETE SUPPLY
complete project package
HIGH QUALITY
goods from the world's leading manufacturers
BOTAMENT M 21 | It is a flexible, thin-layer tile adhesive for laying almost all types of ceramic wall and floor coverings, indoors and outdoors.
Benefits of tile adhesive Botament M 21
-
Elastic tile adhesive;
-
High strength tile adhesive;
-
Adhesive for tiles for underfloor heating;
-
Effective tile adhesive for tile- on-tile installation;
-
Long adjustment time and open time;
-
Botament tile adhesive, suitable for lining swimming pools and potable water tanks;
- Tested in a system in combination with a BOTAMENT AE pressure seal.
Scope of tile adhesive
For gluing:
-
ceramic and porcelain tiles;
-
clinker slabs for flooring and clinker tiles;
-
homemade tiles;
-
small and medium mosaics;
-
insulating and light building boards;
- very smooth surfaces (e.g. extruded polystyrene boards) need to be roughened before bonding.
Base
-
Concrete, lightweight concrete and cellular concrete;
-
Masonry;
-
Plasters of categories CS II, CS III and CS IV according to DIN EN 998 and gypsum plasters according to DIN EN 13279 (compressive strength ≥ 2.5 N/mm²);
-
Building boards BOTAMENT BP;
-
Old tiles;
-
Gypsum walls, plasterboard and gypsum boards;
- Cement and anhydride screeds.
Foundation preparation
The base must meet the following requirements:
-
dry, clean and unfrozen;
-
ability to carry a load;
-
cleaned from grease, oil, paint, cement laitance, delamination and construction debris ;
-
the surface must be flat;
- absorbent substrates should be primed with BOTAMENT D 11 primer
Storage
Store in a cool dry place for at least 12 months in unopened original packaging.
Mixing ratio
6.25 l water / 25 kg.
Ripening time
5 minutes.
Оpen time
3 hours.
Maximum layer thickness
5 mm.
Possibility of movement
Through: 24 hours.
Possibility of grouting
Through: 24 hours.
Full load capability
In 7 days.
Glue preparation
-
Knead the mixture with cold, clean water;
-
Slowly mixing with a low-speed mixer, until a homogeneous paste-like mass is obtained;
- Application and surface temperature: +5°C to +30°C
Consumption
-
Notched trowel 6 mm: 2.4 kg / m²;
-
Notched trowel 8 mm: 3.2 kg / m²;
- Notched trowel 10 mm: 3.8 kg / m².
Recommendations
When installing ceramic coatings, all existing codes and regulations in their current versions should be observed.
Package
Paper bag 25 kg.