Home / Catalog / Floor care / Strengthening and dedusting of concrete / Water based liquid hardener

ULTRALIT HARD STANDARD

ULTRALIT HARD STANDARD | Dust removal of concrete floors

Liquid hardener for concrete floors and topping, based on lithium silicate

Polished concrete floors

Polished warehouse floors

Industrial floors of Ukraine

PROFESSIONAL CONSULTATION

more than 15 years of experience

WARRANTY FROM THE SUPPLIER

expiration date control

COMPLETE SUPPLY
complete project package

FAST DELIVERY

transport companies, courier services

HIGH QUALITY
goods from the world's leading manufacturers

LOYALTY PROGRAM

partner prices for regular customers

Description

Characteristics

Application

ULTRALIT HARD STANDARD | Lithium hardener, with high active dry residue, water-based, used for hardening, dedusting of new and existing concrete floors.

The Ultralit Hard Standard product component is an active lithium silicate that enters into a chemical reaction with concrete components, forming insoluble calcium hydrosilicate (CSH) compounds that give concrete additional strength, reduce dust, and facilitate cleaning of concrete floors.

Taking into account the fact that the chemical reaction occurs in the upper layer of concrete, concrete protection with Ultralit Hard Standard material is more reliable and durable than traditional surface coatings, because it never peels off and is not exposed to the influence of moisture in concrete.

Benefits of using Ultralit Hard Standard

The highest content of lithium in the industry: up to 11%;

Active components: 100% dry residue;

Fast hardening and dedusting reaction: 14-28 days;

Can be applied to concrete of any age;

Excellent penetrating ability: 2-8 mm on ground concrete;

Increases the abrasive resistance of concrete: by 15-40%;

Does not cause alkali-silicate reaction (ASR);

Good resistance to the penetration of water and to the formation of spots;

Does not change the sliding coefficient of the floor;

Extremely fast application: minutes instead of days;

The most economical concrete floor strengthening system per 1 m2 in the world;

Absolutely "GREEN" and safe water-based product.

Scope of application of Ultralit Hard Standard

Shopping centers;

Supermarkets;

Parking lots;

Aircraft hangars;

Warehouses;

Logistics centers;

Production premises;

Schools and Universities;

Medical institutions;

Office premises.

Ultralit Hard Standard packaging

Packaging: 5; 20 liters

Approximate consumption of Ultralit Hard Standard

Freshly laid concrete without a membrane former: 15-20 m2/l; (50-65 ml/m2);

Ground concrete after 28 days of exposure: 10-12 m2/l; (85-100 ml/m2);

Polished concrete after 28 days of exposure: 10-15 m2/l; (65-100 ml/m2).

ULTRALIT HARD STANDARD

Physical characteristics of Ultralit Hard Standard

View	Transparent liquid
Density	1.10
РХ	11.7
Dry residue	11%
Active content	100% dry residue
VOC content	< 20 g/l
Freezing temperature	0°C
Ignition temperature	Incombustible
Storage period	2 years old, in original, closed packaging

Precautions / Restrictions in working with Ultralit Hard Standard

Always clean the surface of dirt, plaque, membrane-forming agents, coatings that may prevent Ultralit Hard Standard from penetrating the structure of the base.
Apply Ultralit Hard Standard only when the air temperature is above +2ºC, at least within 4 hours after application;

At high air temperatures, it is recommended to cool the concrete surface by spraying a small amount of water on the surface before applying Ultralit Hard Standard;

Protect metal, glass, wooden, brick surfaces from being hit by Ultralit Hard Standard;
If Ultralit Hard Standard gets on these surfaces, wash the surface with water;

In all cases, read the Safety Data Sheet before use.

Ultralit Hard Standard application technology

There is no need to prepare the surface before applying Ultralit Hard Standard to freshly laid concrete;
Cut seams after final surface treatment (usually within 24-48 hours after grouting);

Clean the concrete surface from dust and dirt;

In case of application of the product on existing concrete, thoroughly clean the surface, remove all dust, dirt, membrane forming agent;
Allow the surface to dry;
It is recommended to use grinding equipment and a diamond tool to remove the weak top layer of concrete, as well as, if necessary, to open the crushed stone filler;
Recommended level of grinding / polishing before applying Ultralit Hard Standard : 100-400 grit plastic;

Using a low-pressure sprayer, apply the first coat of Ultralit Hard Standard at a rate to cover the entire surface without the formation of bubbles;
Spread Ultralit Hard Standard evenly over the surface using a mop and a microfiber mop, pre-moistened with the product;
The average consumption in the case of freshly laid concrete is 15-20 m2/l, in the case of existing concrete 10-15 m2/l;
Treated surfaces must remain wet for 10-15 minutes after applying the product;
Apply the product again to areas where the surface has dried faster than in 10 minutes;

Allow the surfaces to dry completely - standard 1 hour;

In the case of freshly laid concrete: apply a membrane forming agent or use other methods to retain moisture in the concrete;

In the case of existing concrete, to obtain high-gloss polished concrete, use a grinding technique, gradually changing the diamond tool to the level of 800 - 3000 grit plastic;

If the filling of seams is planned after applying Ultralit Hard Standard, the seams must be thoroughly cleaned before filling;

Cleaning with a diamond disc is recommended;

The surface is ready for use as soon as it has completely dried, while the chemical reaction in the concrete will take place within 2 weeks, depending on the temperature and humidity conditions.

Clean the brushes, tool, equipment, sprayer with clean water immediately after use.

Servicing

Do not use acidic cleaning agents (pH below 7) to clean treated floors;

Despite the fact that Ultralit Hard Standard will improve the resistance of the floor to the penetration of various media and the formation of stains, some acid products can leave stains on the surface;

Clean up any spills as quickly as possible;

Daily dusting with a mop will keep the floors in excellent condition for a long time;
Regular cleaning of the floor with a washing machine will improve the gloss of the surface.

SECURITY / INFORMATION

Ultralit Hard Standard has an alkaline base;
Don't drink ego;
If it gets into the gastrointestinal tract, drink a large amount of water;
DO NOT INDUCE VOMITING artificially, consult a doctor;

Always keep the canister closed when not using the product;
Use goggles and gloves when applying;
In case of contact with the eyes, rinse the eyes immediately with clean water and consult a doctor if the irritation persists;